Call settings
Note: To change the settings for call diverting, go to
Menu
→
Tools
→
Call divert
.
See
‘Settings for call diverting’
, p.
21
.
Send my caller ID
• This network service allows you to set your phone number to be displayed (
Yes
) or
hidden (
No
) from the person to whom you are calling. Or, the value may be set by your
network operator or service provider when you make a subscription (
Set by network
).
Call waiting:
(network service)
• The network will notify you of a new incoming call while you have a call in progress.
Select:
Activate
to request the network to activate call waiting,
Cancel
to request the
network to deactivate call waiting, or
Check status
, to check if the function is active
or not.
Fig. 2 The screen saver.
Copyright © 2003 Nokia. All rights reserved.
Settings
30
Automatic redial
• When this setting is activated, your phone will make a maximum of ten attempts to
connect the call after an unsuccessful call attempt. Press
to stop automatic
redialling.
Summary after call
• Activate this setting if you want the phone to briefly display the duration and cost of
the last call. To show costs, the
Call cost limit
needs to be activated for your SIM card.
See p.
24
.
Speed dialling
• Select
On
and the numbers assigned to the speed dialling keys (
-
), can be
dialled by pressing and holding the key. See also
‘Assigning speed dialling keys’
, p.
49
.
Anykey answer
• Select
On
, and you can answer an incoming call by briefly pressing any key, except
, ,
and .
Line in use
(network service)
Voice message
indicators: , ,
or
is shown if you
have one or several voice
messages.
• This setting is shown only if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line (
Line 1
or
Line 2
) you want to use for making
calls and sending text messages. Calls on both lines can be answered irrespective of
the selected line.
Note: You will not be able to make calls if you select
Line 2
and have not
subscribed to this network service.
Tip: To switch
between the phone lines,
press and hold
in
standby mode.
To prevent line selection, select
Line change
→
Disable
if supported by your SIM card. To
change this setting, you need the PIN2 code.
Copyright © 2003 Nokia. All rights reserved.
Settings
31